Read about Italian Automobiles: Ferrari, Maserati, Abarth, Lancia, Alfa Romeo, OSCA, Zagato, Ghia, Pininfarina, F1 Racing and more...

   You found VeloceToday's OLD website.
Please visit VeloceToday's New Website for the latest articles, news and more...

NOTE: You are viewing the OLD VeloceToday website. We are in the process of moving some of the old articles from the OLD site to the NEW site.

Home Cars Racing News People Lifestyle Events


February 23rd 2005

Alfa Designers

Four of the Greatest

By Pete Vack

From the beginning, Alfa Romeo has been blessed with great designers. It is, after all, men who make the machines, and in the first half of the twentieth century, Italy produced a number of engineers who literally put this new and relatively poor country on the automotive map. Here are but four of the greatest engineers to have worked for Alfa Romeo, and who were responsible for the finest and fastest Alfa Romeos.

Giuseppe Merosi
Chief engineer from 1910 to 1926, Merosi is generally remembered as the creator of the sturdy but not overly-exciting 24 hp, 20/30 series and RLs. However, in 1914, Merosi designed the first DOHC Alfa engine for the Grand Prix formula which stipulated a capacity of 4.5 liters. Merosi came up with a four cylinder, 16 valve head with valve angle of 90 degrees. The war halted its development, but in 1922 Merosi again produced a DOHC engine, a six cylinder, but it was to prove ineffective.

It was Merosi, not Jano, who brought the DOHC engine to Alfa Romeo. Four valves per cylinder and looking extremely modern. Not bad for 1914.

Giuseppe Merosi left Alfa in 1926, and worked as an engineer for a variety of other firms including Isotta Fraschini. He died in 1956 at the age of 84.

Vittorio Jano
Perhaps the most gifted and prolific of all Alfa Romeo engineers, Vittorio Jano took over after Merosi left the company in 1926, having come from Fiat by the urging of Enzo Ferrari in 1924. He immediately began work on the P2 Grand Prix car, which was based on his experience with the very successful Fiat 805. The P2 was extremely successful, and was followed in rapid succession by the 6C1500, (1927) the 6C1750, (1929) the 8C2300 (1931) and what is perhaps his crowning achievement at Alfa, the 8C2900 in 1936.

Incredibly complex DOHC V-12 of 1936-7 put out 370 hp but not enough to beat Mercedes.

Jano, in fact, almost single-handedly created the most successful Alfa Romeos, and along with that, the Ferrari-like legend that lives on today. Yet the failure of the 12 cylinder GP engine to defeat the Mercedes and Auto Unions in the late 1930s cost him his job at Alfa Romeo. Jano went on to Lancia, where again he engineered some of the greatest Lancia engines, among them the D-50 Grand Prix car in 1954. In 1965, fearing cancer, Vittorio Jano committed suicide.

Gioachino Colombo
Born in 1903, Colombo worked alongside Vittorio Jano for years before getting the chance to create one of his finest works, the 158 straight eight engine for Alfa in 1938. As the Germans dominated the existing Grand Prix formulas, it was time to try a different tact. Alfa Romeo would design a car which would dominate the voiturette class of 1500cc race cars. The birth of the 158 Alfa was a combination of the efforts of Enzo Ferrari, Colombo and Liugi Bazzi. While successful right away, the 158/159 totally dominated Grand Prix racing in the post war era from 1946 to 1951, when Alfa retired from racing.

Eventually the 8 cylinder 1500 cc 159 engine developed over 425 hp, with two stage supercharging.

After the war, Gioachino Colombo was asked by Enzo Ferrari to design a V-12 sports racing car. This he did in four months; the 125S became the first Ferrari and the progenitor of all the Ferrari V-12s. He died in 1987 after a long and illustrious career.

Orazio Satta
After WWII, a bombed out Alfa Romeo struggled to regain life. It was essential to begin the mass production of automobiles, but accord them the passion, handling, performance, and engineering principles which had made Alfa Romeo famous. This was accomplished by the team assembled by Chief Engineer Orazio Satta, which consisted of Gianpaolo Garcia, Giuseppe Busso, Ivo Colucci and Livio Nicolis. The team was responsible for the 1900 series, the 2600, 1300, 1600, 1750, 2000 and Montreal. For over 25 years, Satta guided his team to create the post war cars we have come to appreciate so much.

The classic four cylinder Giulietta 1300cc engine of 1954.

Born in 1910, Satta joined Alfa Romeo in 1939, appointed director of design and experimentation in 1951, and died in 1974 after a long illness.

Past Issues


Ferrari 712 Can Am

Articles on or about OSCA

Articles on or about Maserati

Articles on or about Lancia

Articles on or about Fiat

Fiat Dino, Body

Fiat Dino, Chassis

Serenissima F1

Winningest OSCA

Alfa 164 V10

Ramponi's Delage

OSCA Berlinettas

Maserati 250F Remembered

Lancia Rally Delta and Integrale

Lancia Rally 037 and S4

Alpine Adventures

Bandini, Giaurs, Siatas etc.

Alpine A110

Classic Fiat 500s in Turin

New Fiat 500 hits the streets

New Fiat 500 Intro

Fiat 500 Restoration

Fiat 500 pushed and pulled

Fiat 500 Art

Giulietta Sprint Veloce Part 2

Giulietta Sprint Veloce Part 1

Fortune 500 (Fiat)

Giulietta Racing Part 2

Giulietta Racing P1

Appia Specials

Appia Series 3

Appia Series 2

Appia Restoration

Appia Series 1

Kalikow on the 612K

Articles on Alfa Romeo

Fiat Balilla Berlinetta


New Website Features

  • Search articles and archives

  • Submit your comments to a specific article

  • Email an article to a friend

  • Browse real time classifieds from Hemmings and Ebay

  • Shop at VeloceToday's Store for Books and more

To see these new features in action visit the new website at: